Quebec
Induscoat is an industrial coating applicator and supplier in Quebec, based in LaSalle (Montreal). We select, supply and apply corrosion- and wear-protection systems — epoxies, ceramic-filled compounds, polymers — and perform weld-free repairs on in-service equipment: pumps, heat exchangers, tanks, slurry lines. Our crews mobilize to mining sites in Abitibi-Témiscamingue and Nord-du-Québec, Saguenay–Lac-Saint-Jean aluminum smelters, cement plants and energy facilities, during spring shutdowns (April–May) and winter maintenance windows (November–January).
Regions served
- Abitibi-Témiscamingue (Val-d'Or, Rouyn-Noranda, Amos)
- Nord-du-Québec (Matagami, Chibougamau, Lebel-sur-Quévillon)
- Saguenay–Lac-Saint-Jean (Jonquière, Alma — aluminum smelters)
- Greater Montreal & Montérégie (LaSalle, headquarters)
- Mauricie & Centre-du-Québec (pulp & paper, cement)
- Côte-Nord (Fermont, Sept-Îles — iron ore)
Industries served
- Mining — gold, copper, zinc, nickel, iron, diamond
- Energy — hydroelectric, thermal, nuclear
- Cement & Limestone — Quebec cement plants
- Aluminum & Metallurgy — Saguenay smelters
- Oil & Gas — Montreal-East refining
- Chemical & Petrochemical — Bécancour, Varennes
- Pulp & paper — Mauricie, Saguenay
Services & solutions
- Protective anti-corrosion coatings (NACE/AMPP, ISO 8501, SSPC)
- Equipment rehabilitation (cold-cure epoxy, polymers)
- Wear and foundry parts for crushers and mills
- Custom parts fabrication — stainless, machined, fabricated
- Internal lining of tanks and process vessels
- Shutdown management and feasibility studies
Brands distributed
- Induscoat — own brand (Canada coatings)
Operational mobilization
In Quebec, our crews mobilize primarily for two shutdown windows: spring thaw (April–May) and winter maintenance (November–January). We coordinate remote-site access logistics (Abitibi, Nord-du-Québec, Côte-Nord) with full HSE protocols — confined space, hot work, ATEX. Emergency response within 24 business hours.
Frequently asked questions
What types of industrial coatings do you apply in Quebec?
Corrosion-protection systems for immersion and atmospheric service (epoxy, vinyl ester, polyurethane), ceramic-filled abrasion-resistant coatings for slurry lines and mining equipment, and internal tank linings. Selection is driven by the site's documented exposure — not by catalogue.
Do you apply the coatings or only supply the products?
Both. We supply the coating products and our qualified crews carry out surface preparation (SSPC/NACE-AMPP, ISO 8501 standards) and application on site or in shop, with QC reporting (film thickness, anchor profile, ambient conditions).
Which regions of Quebec do you serve?
The entire province from Montreal (LaSalle): Abitibi-Témiscamingue, Nord-du-Québec, Côte-Nord, Saguenay–Lac-Saint-Jean, Mauricie, Centre-du-Québec and Greater Montreal. Remote-site access logistics are built into the intervention plan.
Can you repair equipment without dismantling or welding?
Yes — that is our specialty. Cold-cure epoxy and polymer composites repair pumps, heat exchangers, tanks and piping in place, with no hot work or fire permit, including in classified zones. Feasibility depends on the damage and the applicable code; we validate before pricing.
How fast do you respond to a quote request in Quebec?
Within 24 business hours. Send the inspection report, photos and dimensions through the quote request form; for shutdown emergencies, call us directly.
Explore our solutions
Industrial solutions in Quebec
Protective coatings, maintenance projects, foundry wear parts and custom parts. Quote within 24 business hours.