Available — respond within 24 business hours|1700 Viola-Desmond, LaSalle, QC H8N 0H1, Canada
Blog
- All articles
- Alumina ceramic vs AR steel: wear liner selection by wear mechanism
- API 510: what the pressure vessel code means for repair decisions
- API 570: what the piping inspection code means for your repair decisions
- API 653 composite tank repair: which findings, which repair, who decides
- ASME PCC-2 composite repairs: what the standard authorizes — and what it does not
- ASTM B117 salt spray: what 1,000 hours actually proves
- Machined components for explosive atmospheres: what compliance actually requires
- Hazardous area repair without hot work: cold repair in ATEX zones and Canadian hazardous locations
- Cathodic protection: sacrificial anodes vs impressed current, and why the coating matters as much as the current
- Centrifugal pump repair procedure: rebuilding the casing and impeller with epoxy
- Chute liner repair and hopper wear repair: rebuilding chutes, hoppers and cyclones during a shutdown
- Coating failure analysis: how to diagnose blistering, delamination, cracking and other coating defects
- Coating life cycle cost: how to calculate the total cost of ownership of a protective coating
- Cold bonding vs welding: the cold bonding process, its limits, and when welding still wins
- Applying epoxy coatings in cold weather: what changes below 10 °C during a winter shutdown
- Secondary containment coating: chemical resistant coatings for concrete dikes, pits and sumps
- Corrosion under insulation (CUI): mechanism, inspection and prevention guide
- Crevice corrosion: the attack that starts where you cannot look
- Crusher wear parts: choosing between Mn13, Mn18, Mn24 and high-chrome iron
- CSA Z245.30: field-applied coatings for steel pipeline systems
- Custom corrosion-resistant parts fabrication: choosing the material and the protection
- Epoxy coating lifespan in immersion: what really sets the service life of a tank lining
- Flange face corrosion repair: rebuilding a sealing surface without machining or welding
- Galvanic corrosion in heat exchangers: tube sheets, water boxes, prevention and repair
- Galvanic couples in industrial plants: common metal pairs and how to control them
- The galvanic series: the full table and how to actually use it
- Graphite heat exchanger repair and restoration: repair instead of replace
- Heat exchanger corrosion: causes and prevention, component by component
- Tube sheet repair and water box coating: a step-by-step procedure for heat exchangers and condensers
- Heavy machinery epoxy grouting: foundation repair and grout design for SAG mills, crushers, compressors and turbines
- In-place coating: protecting equipment without taking it apart
- Corrosion protection for industrial metals: the five families of solutions
- Industrial tank coating: how to choose the internal lining for the product you store
- Industrial wear protection solutions: choosing protection by wear mechanism (abrasion, impact, erosion, cavitation, sliding)
- Choosing a coating system under ISO 12944: durability and selection
- ISO 8501 or SSPC/NACE: which system governs your surface preparation spec?
- Maintenance painting of industrial steel structures: touch-up, overcoat or full removal
- Metal repair epoxy putty: how to choose a metal-filled or ceramic-filled epoxy for cold repairs
- MIC: when bacteria eat your equipment
- Mining equipment coatings and wear protection: a zone-by-zone guide to the ore processing plant
- SSPC-SP10 surface preparation (NACE No. 2): the near-white metal blast guide
- NACE, SSPC, AMPP: the designation map after the merger
- Pipe leak repair without shutdown: clamps, composite wraps or sealants — which method for which leak
- Pipeline coatings in Canada: field joints, CSA Z245.30, and what the applicator has to prove
- Pitting corrosion: mechanism, pit types, testing, prevention and repair
- Power tool cleaning: SSPC-SP 3, SP 11 and SP 15 when blasting is not an option
- Process vessel corrosion protection: internal linings and repair for reactors, columns and pressure vessels
- Pump foundation and baseplate repair: when epoxy grout beats re-pouring the concrete
- Repair or replace industrial equipment: a repair vs replace decision method for corroded and worn assets
- Reverse engineering a part with no drawings: from worn casting to new part
- Salt spray vs cyclic corrosion testing: which test to require to qualify a coating
- Tank internal lining: fitting the job inside the shutdown window
- Types of industrial corrosion: how to recognize, diagnose and prevent each form
- Valve body repair with epoxy: when to rebuild, coat or replace an eroded or corroded valve
- Wastewater concrete corrosion: how H2S attacks concrete, and how to repair and line wet wells, pits and channels
- Worn shaft repair without welding: rebuilding bearing seats, bearing housings and keyways cold
Applications
Main pages
Services
Sectors
For Google Search Console, submit: https://induscoat.ca/sitemap.xml