Industrial painting and coatings in Gatineau

What we do in Gatineau

We prepare and protect steel and concrete on industrial sites and structures in the Outaouais: abrasive and hydro blasting, anti-corrosion painting of structures and equipment, coatings for hydroelectric components, bridge painting, tank linings and industrial floors. Work is carried out by our crews and qualified subcontractors, under one quote and one inspection file.

Coatings are our core business. The system is chosen from the environment (immersion, steam, de-icing salts, abrasion) and the ISO 12944 corrosivity, then applied to the manufacturer's data sheet. We serve industrial sites and infrastructure, not residential.

• Protective coatings: systems and inspection
• Industrial painting

Industrial sectors in the Outaouais

Gatineau grew around the Ottawa River and the wood industry. Pulp and paper and wood processing are still present, with digesters, chests, conveyors and frames exposed to steam and process chemicals. The city also has manufacturing plants, warehouses and municipal water treatment facilities.

The Ottawa, Gatineau and du Lièvre rivers carry several generating stations and dams: gates, trash racks, penstocks and embedded parts work under immersion and abrasion. The interprovincial and road bridges, finally, take de-icing salts and river humidity.

• Hydroelectric coatings
• Corrosion protection

Most requested services in Gatineau

In paper mills, demand covers painting of frames and equipment in humid atmospheres, linings for chests and tanks, and concrete protection for pits and channels. Hydro blasting removes process deposits and old films without abrasive.

For hydroelectric structures, gates and trash racks are rehabilitated by abrasive blasting and immersion coating, sometimes with metallizing. For bridges, work is done under containment, with an anti-corrosion system chosen for salts. Epoxy floors for shops and plants round out the demand.

• Bridge painting
• Hydro blasting
• Thermal spray metallizing
• Tank and water tower painting

On-site work in mills, stations and on bridges

Everything is done on site. In mills, our crews work zone by zone or during the annual shutdown, with containment and dust collection. In generating stations, parts are treated in place during dewatering, or brought out to a work area set up near the structure. On a bridge, containment captures abrasive and debris, and the schedule respects the approved lane closures.

The quote states what is done in place and what is moved, along with water protection measures.

• Abrasive blasting

Access and planning from LaSalle

Gatineau is reached from LaSalle by road, on the north shore of the Ottawa River. A survey can be done as a day trip; longer jobs are organized with lodging. Quantities, access equipment and permits (confined space, lockout, work at height, dewatering) are settled remotely before departure.

Gatineau is also the gateway to Ontario: one trip can cover a site across the river. For a multi-trade shutdown, our project management service coordinates the coating schedule.

• Project management and shutdown coordination

Climate in the Outaouais

The Outaouais has cold winters and hot, humid summers. Near the rivers and paper mills, humidity and steam make condensation on steel a daily constraint. On bridges and docks, de-icing salts and freeze cycles attack steel and concrete.

We measure substrate temperature, relative humidity and dew point before every coat. Exterior work is done in the warm season, often alongside summer dewatering at generating stations. In winter, work is done under a heated, ventilated enclosure. If conditions are not met, the coat waits.

• Flash rust: causes and prevention

Standards and inspection records

We apply the owner's specification. Common references are ISO 12944 for system selection, ISO 8501-1 and SSPC/AMPP standards for preparation (SSPC-SP 10 for immersion), SSPC-PA 2 for dry film thickness and SSPC-CS 23.00 for metallizing. The site receives a file: ambient conditions, preparation, thicknesses, adhesion and continuity, data sheets and photos.

• Coating inspection